On your device there is usually a sticker next to the nameplate with a 2D bar code and the serial number (7-digit alphanumeric, i.e. numbers and capital letters).
The serial number on the sticker shown here is only an example!
Quicksearch
Please note that you must first select your ID number above to see the list view and exploded drawing of your product. You can find your identification number on the nameplate next to the article number or in your operating instructions.
Spareparts for Vorfilter 25 cm displayed via list view or via explosion drawing
Sparepart overview
Explosiondrawing
Instructions and data sheets for Vorfilter 25 cm
Not able to find operating instructions for your tool? No worries: all our manuals and documents are also available online - it takes just a mouse click to download them.
Instructions and data sheets for Vorfilter 25 cm
Not able to find operating instructions for your tool? No worries: all our manuals and documents are also available online - it takes just a mouse click to download them.
Instructions and data sheets for Vorfilter 25 cm
Not able to find operating instructions for your tool? No worries: all our manuals and documents are also available online - it takes just a mouse click to download them.
Instructions and data sheets for Vorfilter 25 cm
Not able to find operating instructions for your tool? No worries: all our manuals and documents are also available online - it takes just a mouse click to download them.
Instructions and data sheets for Vorfilter 25 cm
Not able to find operating instructions for your tool? No worries: all our manuals and documents are also available online - it takes just a mouse click to download them.
The fine-mesh protection for pumps against damage-causing impurities:
The Einhell 25 cm pre-filter is a robust protective mechanism for garden pumps, domestic waterworks and automatic domestic water systems against damage-causing impurities. The integrated fine filter with a mesh width of 0.2 millimeters is washable, easy to remove and easy to change. The pre-filter has a ventilation screw, a brass female thread (33.3 mm) and a transparent filter housing. The maximum recommended working pressure is 5.5 bar. The temperature of the liquid fed through must not exceed 35°C. Delivery contents a double nipple with a 33.3 mm (1" male thread) and an adapter fitting with 33.3 mm (1" male thread) / 42 mm (1 1/4" female thread).
Easy to clean: take it out, rinse it out and the job is done. The filter element is easy to remove and can be cleaned with clear water. The fine filter fabric on the inside should not be damaged whilst cleaning. Cleaning frequency is dependent on the amount of dirt particles in the water.
Specifications
Facts, figures and information for Preliminary Filter Vorfilter 25 cm: here you will find detailed technical data, as well as specific information on dimensions, weight and packaging of this iSC product.
Technical info
| Max. water temperature | 35 °C |
| Connection | 33,3 mm - 1" (thread) " |
| Length of filter cartridge | 0.25 m |
| Thickness of filter grid | 0.0002 m |
| Max. flow rate | 4300 L/h |
| Max. working pressure | 5.5 bar |
Images
Manufacturer information
iSC GmbH
Eschenstraße 6
D-94405 Landau/Isar
Germany
Contact form
Newsletter subscription
Success
Show and edit cart
Item has been added to cart
Error
An Error occured
Product was added to the comparison list.
Open comparison list